Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® S 2010 G4 SW 15038 - PSU-GF20 - BASF

Material Data Center offers the following functions for Ultrason® S 2010 G4 SW 15038:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultrason S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 40 cm³/10min ISO 1133
温度 360 °C -
荷重 10 kg -
成形収縮率, 平行 0.3 % ISO 294-4, 2577
成形収縮率, 直角 0.5 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 6600 MPa ISO 527
破壊応力 115 MPa ISO 527
破壊ひずみ 2.9 % ISO 527
シャルピー衝撃強さ, +23°C 50 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 55 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 8 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 8 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 8 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 8 kJ/m² ISO 180/1A
温度 -30 °C -
Ball indentation hardness 170 MPa ISO 2039-1
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 187 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 184 °C ISO 75-1/-2
線膨張係数, 平行 26 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-1 class IEC 60695-11-10
試験片の厚さ 1.6 mm -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
電気的特性.値単位テスト基準
ISO データ
比誘電率, 100Hz 3.5 - IEC 62631-2-1
比誘電率, 1MHz 3.5 - IEC 62631-2-1
誘電正接, 100Hz 10 E-4 IEC 62631-2-1
誘電正接, 1MHz 60 E-4 IEC 62631-2-1
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 46 kV/mm IEC 60243-1
耐トラッキング性 125 - IEC 60112
その他の特性.値単位テスト基準
吸水率. 0.7 % Sim. to ISO 62
吸湿率 0.2 % Sim. to ISO 62
密度. 1380 kg/m³ ISO 1183
材料特有の特性値単位テスト基準
ISO データ
粘度数. 63 cm³/g ISO 307, 1157, 1628
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット., 黒
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.